ULC Commercial
FIRE ALARM MONITORING

As the name implies, smoke and heat detectors respond to both smoke and high temperatures. If either situation is detected, the device will alert the system. Most smoke and heat sensors detect smoke before they detect high temperatures. But there are some cases where the high temperatures may reach the sensor first.

When designing a sprinkler system one of the first decisions a designer has to make is what type of sprinkler system should be installed. Types of sprinkler systems permissible by NFPA 13, Standard for the Installation of Sprinkler Systems, are wet, dry, preaction, and deluge. Other types of extinguishing systems, such as clean agent or water mist, are addressed by other standards. When selecting the appropriate sprinkler system type it is important to first understand the differences between the systems and then to understand how these differences can be beneficial, or detrimental, under certain conditions.

Alarm Annunciator is an array of indicator lights. It signals the presence of abnormal conditions by blinking LED and sounding an audible buzzer. In industrial process control, an annunciator panel is a system to alert operators of alarm conditions in the plant.

Every building should have a working fire alarm system to comply with codes and regulations. To this end, you will find a fire alarm pull station in virtually every building you visit. Fire pull stations have not changed much over the years. However, they have become somewhat redundant and are often overlooked, as many buildings have installed automatic fire detectors.

Unfortunately, the majority of these are NOT PROFESSIONALLY MONITORED.

The building emergency action plan provides guidance to occupants during an emergency situation. The information listed in each document includes disaster and crisis planning, contact information for building and floor leaders, and maps of emergency exits and evacuation gathering locations.

A fire extinguishing systems is an engineered set of components that work together to quickly detect a fire, alert occupants, and extinguish the fire before extensive damage can occur. All system components must be: Designed and approved for use on the specific fire hazards they are expected to control or extinguish.

Emergency lights are connected to the normal electrical supply of a building and contain one or more sealed lead-acid batteries inside which illuminate the lights when no power is available. Emergency lights come standard with two heads; additional remote heads can be added if the size of the battery will allow.

commercial fire sprinkler systems require pressure gauges at check valves, control valves, the main drain, and a host of other locations. Keeping fire sprinkler gauges in working order simplifies inspections and makes spotting serious problems – from a lack of water pressure to a closed valve – much easier. In this article, we’ll look at where these fire safety gauges are placed in commercial and residential fire sprinkler systems and when they need to be replaced.

Video alarm verification is not new to our industry and has multiple variants and manufacturer solutions in the field that are used today; however, it appears it has not been promoted or pushed as hard as it could be. Over the past few years, developments made with its features and benefits have made it much easier to incorporate with any sized security project – giving integraters a valuable avenue to satisfied customers